3 Phase G400 Hydraulic High Speed Pipe Shrinking Machine Alloy Steel Pipes

Hydraulic High Speed Pipe Shrinking Machine 12 -- 25mm For Alloy Steel Pipes

G400 shrinking machine for making pipe before done in drawing machine

The pipe shrinking machine is to shrink one end of the pipe through hydraulic pressure or to firmly buckle metal products on the desired hose or oil pipe. The steel pipe shrinking machine is mainly used for the reuse of waste steel pipes at construction sites, connecting long steel pipes and shortening joints as casing machines. The equipment is simple to operate, easy to use, and has a wide range of applications. It is the first-choice equipment on construction sites. In addition, we also have an electric tube bender, mini concrete pump, mortar spraying machine, portable sand blasting machine, anchor drilling machine, rebar upsetting machine, rebar derusting machine, and etc.

Quick Detail:

1. Type: pipe-shrinking machine

2. Model Number: G400

3. Used in: G400 pipe-shrinking machine is for making pipe before drawing machine,the material can be any metal.G400 pipe-shrinking machinecan roll pipe diameter of 12--25mm to 10--20m

G400 pipe-shrinking machine operations and processes

1. Take out the mould by rotating it according to arrow direction, no reverse rotation allowed.

2. Moulds can be changed according to different specifications.

3. Head length can be adjusted by middle adjusting rod, loose the belt wheel screw, adjust the length and fasted the screw again.

4. Pour in 80% diesel and 20% engine oil, as the oil pump capacity is big, oil box entrance valve should be fully open, machine valve fix a little oil is ok.

5. After the umbrella-block wear down and the gap becomes big, you can put a gasket between umbrella block and the mould, but the gasket can not be too thick so that machine won't get stuck.

6. The lubrication oil should be changed after it gets dirty.

Safety Precautions

1,Place the machine on a fixed horizontal surface and the calibration level, the machine is stable.

2,Check the oil level before use, to keep the hydraulic oil target position in 1/2 or more.

3,Check the motor rotation, such as rotation error, please adjust the power wiring.

4,When the state machine automatically, please confirm the accuracy of the input data.

5,When the machine is operating, safety, the hands, the body, such as near the action area is prohibited.

6,People must be dedicated machine operation, and the operator should be able to reach and stand within the scope of the emergency stop button.

7,Machine must be grounded.

8,When remove mold, must turn off the power.

9,Please refuel oil regularly.

10,Keep the machine and the environment clean.

11,Not allowed to work in the dust, conductive particles and acids and other places.

Factory picture:

Part of the machine:

3 Phase Heat Shrink Tunnel Machine

G400 Hydraulic Tube End Former Machine

Alloy Steel Pipe Shrink Tunnel Machine

3 Phase G400 Hydraulic High Speed Pipe Shrinking Machine Alloy Steel Pipes Images